Have you ever wondered why it is harder to keep your balance with a heavy backpack on? Or why it is difficult to make a toddler's sippy cup tip over? Or how tightrope walkers manage their impressive circus acts? Or perhaps you want to know how to make your toy car less prone to toppling over when racing through a sharp curve. In this activity you'll get to investigate balance using marshmallows, skewers and toothpicks. Read on for some sticky, yummy balancing fun!
The balance of an object has everything to do with the distribution of its mass. For example, you might find it easy to stand upright on the edge of a curb when you're holding a heavy backpack down in front of you, but it gets quite a bit more challenging when that backpack is high up on your back. This has to do with how your combined center of mass with the backpack changes in these scenarios.
In physics the center of mass of an object is a point where the entire mass of the object may be represented as being concentrated. It's the weighted average of the mass particles of the object. It will be in the center of the object if the mass is uniformly distributed (such as with a hula hoop) but shifted to the heavier side of an object if the mass is not uniformly distributed (such as with a car). In some cases the center of mass is a point in space outside the actual object. For example, the center of mass for a hula hoop is in its empty middle.
• Large marshmallows
• Two wood or bamboo skewers (use caution when handling skewers with sharp ends)
• Paper and a pen or pencil
• On a skewer, place one marshmallow in the middle and one on each end. Place the tip of your finger under the middle marshmallow and try to balance the structure on your finger. Can you balance it? Is it easy or difficult? If you cannot balance it, move the middle marshmallow a bit to one side or the other until you find just the right spot that enables you to balance the structure with your finger. We will call this spot the original balance point.
• Poke a toothpick into each end marshmallow. Add one marshmallow to the end of each toothpick and connect the two new marshmallows with another skewer so you get a rectangular shape (with a marshmallow on each corner and one marshmallow at the center of one skewer).
• Place your finger under the original balance point on your new rectangular structure (with most of the structure hanging below this point) and try to balance it on your finger. Can you balance it? Is it easier or more difficult than balancing the simpler structure? If you cannot balance this rectangle, move the middle marshmallow a bit to one side or the other until you can.
• Draw the structure on a piece of paper and then try to balance the structure by putting your finger under the original balance point again. Is the structure completely horizontal, or is it tilted to one side? Rotate the paper your drawing is on so that it has the same angle as your actual structure. On your drawing, mark where your finger is with an "X" and draw a vertical line down from the X.
• Now balance the structure by putting your finger under one of the toothpicks. Is the structure hanging down completely vertically or is it tilted? Rotate the paper your drawing is on so that it has the same angle as your actual structure. Make an X where your finger is and draw a vertical line down from the X.
• Now balance the structure by putting your finger under one of the two corner marshmallows that are farthest away from the middle marshmallow. Is the structure hanging down completely vertically, or is it tilted? Rotate the paper your drawing is on so that it has the same angle as your actual structure. Make an X where your finger is and draw a vertical line down from the X.
• On your drawing, the area where the three lines intersect is the center of mass of your structure. Where is the center of mass of your structure? Where is it in relationship to the middle marshmallow?
• Reorient your structure so that the middle marshmallow is on top. On the middle marshmallow, use toothpicks to attach two more marshmallows, clustered near the middle one. Place your finger under the original balance point and try to balance it. Can you balance it? Is it easier or more difficult than balancing the previous structure?
• Repeat the drawing steps you did before to determine where the three lines intersect and figure out where the center of the mass is now. Based on your new drawing, where is the center of mass of your new structure? Where is it in relationship to the middle marshmallow? If it has changed, how has it changed? Why do you think this is?
• Extra: Try building some other structures using marshmallows, toothpicks and skewers. Where is the center of mass for your other structures? Can you alter it by adding marshmallows to specific places?
• Extra: Find some non-symmetrical objects, such as a toy truck, and see how their distribution of mass affects how stable they are. If you park the toy truck on a hill, how will its distribution of mass influence its balance?
• Extra: As you did at the beginning of this activity, take a skewer and place one marshmallow in the middle and one on each end. Use toothpicks to stack marshmallows on top of the middle marshmallow and try to balance the structure on your finger each time you add another marshmallow. How many marshmallows can you add until you can no longer balance the structure? Make other structures and similarly try stacking marshmallows until they are no longer stable. Can the other structures hold more stacked marshmallows, indicating that their basic structures may be more stable?