ADVERTISEMENT

Paving Slab Generates Electricity with Footfalls

The rubbery surface allows the applied mechanical stress of footsteps to produce piezoelectricity



Lysippos/Wikimedia Commons

LONDON—It could be the last word in concrete solutions to carbon emissions: a paving slab that generates electricity with every footstep taken on it, providing clean power to both cities and remote areas not connected to a national grid. Best of all, it requires mainly used tires and concrete.

The invention is the brainchild of industrial engineering graduate Laurence Kemball-Cook, who came up with the idea, perfected it in his final year at Loughborough University in central England, patented it, set up his company Pavegen and is now busy taking it to the world.

"I was studying the built environment and looking at solar and wind energy. I realized it is very difficult to get nice payback models on PV [photovoltaic solar cells] in urban spaces -- you have got shading, planning restrictions -- and wind is not great, either, because you have got turbulence," he told ClimateWire.

"I left university, and the roller coaster started right there about two years ago. I started with about £50 in my pocket. We have gone through friends and family, high-net worth individuals, and now we have institutional backing," he added.

As with many inventions, the idea seemed simple -- the trick has been in putting it into practice and then fighting to take it to market. Each slab has a surface made of recycled truck tires and a base made of recycled polymer concrete.

From college hallways to battlefields?
So the start is with material that would likely have wound up in a landfill. Each footstep depresses the rubber surface by about 5 millimeters or a fifth of an inch. This, using a mechanism that Pavegen is loath to discuss, is converted into electricity that can either be stored, used immediately or -- in bigger installations -- transmitted to the national grid.

While Kemball-Cook didn't discuss it, scientists and inventors have been working with a phenomena close to what he's experimenting with since the middle of the 18th century. It is known as piezoelectricity, basically an electric charge that accumulates in certain solids, including crystals, bone and some polymers, in response to applied mechanical stress. The word is derived from the Greek verb piezo or piezein, which means to squeeze or press.

The U.S. Defense Advanced Research Projects Agency (DARPA) has made an attempt to power battlefield equipment by piezoelectric generators embedded in soldiers' boots; however, the initial project was dropped because, among other reasons, the boots were uncomfortable.

As Kemball-Cook describes his invention: "Every time someone walks on the slab, it converts the kinetic energy from the footstep into electricity, so it is an off-grid power solution within urban spaces and transport infrastructure."

"Ten slabs around a streetlight would power it all night long from the energy generated during the day. You can get 20 or 30 seconds of light from a small light fitting from one footstep. We are working on much bigger systems right now. Imagine covering Trafalgar Square with these slabs and harnessing all the electricity from the thousands of people who walk across it every day," he added.

The slabs are designed to be retrofitted in place of existing flooring and, being waterproof, can be used inside or outdoors. The power produced can be used to power lights, advertising signs, alarms, music systems or even recharging devices. Display models deliver a weak electric current to power light-emitting diodes (LEDs).

The first to jump on the opportunity of foot-powered lighting was Kemball-Cook's old school in Kent in southeastern England. In December last year, the school covered the floor of a corridor with the power-generating slabs, which light up the area, as the 1,100 pupils make a point of using the corridor as often as possible.

Gotta dance
And that was just the first step.

A group of 20 Pavegen slabs will be installed in the center of a giant shopping mall in east London that has recently opened next to the stadium that will host next year's Olympic Games.

As the tens of thousands of people pass through on their way to or from the stadium each day, they will be helping light the mall with every step they take. Another part of the payoff will be helping the owners meet their tough sustainability targets.

Kemball-Cook has his sights set on bigger projects. "We are looking at transport hubs like airports and train stations, shopping malls. The average person walks 1.8 kilometers [1.1 miles] per airport journey. We have tested slabs thoroughly, and they are tough. We have machines that hammer them up to the equivalent of the high millions of footsteps," he said.

"Our system can be installed in so many different places. There is no one niche area for it," he explained.

Then there is the walkers' involvement with the product. "People are fascinated by it. They want to interact with it." he said. That became obvious with original slabs, which have a small LED lamp in the middle that can be turned on with a footprint. There are other types that simply generate electricity for external use.

"When the Pavegen team took a set of slabs to a music festival in September, they recorded 250,000 footsteps in just three days as people danced on them to make their own disco lighting," the inventor explained. "In fact, we couldn't get them off. We would say, 'Please, we want to go home now,' but they would reply, 'No, we want to keep in dancing,'" he said.

Reprinted from Climatewire with permission from Environment & Energy Publishing, LLC. www.eenews.net, 202-628-6500

Share this Article:

Comments

You must sign in or register as a ScientificAmerican.com member to submit a comment.
Scientific American Back To School

Back to School Sale!

12 Digital Issues + 4 Years of Archive Access just $19.99

Order Now >

X

Email this Article



This function is currently unavailable

X