Skip to main content

Features

100 Years of Electricity and Electronics

Less them the Span of a Single Century Covers the Lifetime of Applied Electricity. From Early Developments in an Obscure Art has Come the Science of Electronics, Taking Over Many Jobs in Industry and Doing Them Better than Ever Before. A Glimpse of the Future

By Vin Zeluff and John Markus

It Pays to Listen

Wire-Recording Equipment and Other Electronic Instruments are Giving New Ears to Factory Men. New Accuracies in Machine and Process Industries, Made Possible by Studying and Comparing Noises, Are Speeding Production, Improving Quality, and cutting Costs

By Edwin Laird Cady

Better Plastics Heating

In Wood Fabrication and in Preparing Plastics Materials for Molding, High Frequency Heating is Well into the Development Stage. The Success that Has Been Attained Bids Fair to Influence Favorably The Rapid Production of Even Large and Complicated Plastics Ports

By Charles A. Breskin

Control in the Air

Electronics Has Brought to Aviation a Versatile Means of Controlling Many of the Airplane's Essential Mechanical Components. Increased Engine Efficiency, Reduced Pilot Fatigue, and Greater Safety are Some of the Worthwhile Results that Have so Far Been Obtained

By Alexander Klemin

Gas in Bottles

Liquefied Petroleum Gas, Because of its High Thermal Efficiency and Adaptability to Convenient Storage and Transportation, has Come to be an Important Factor in American Economy, Both Domestic and Industrial. Its Uses are Widely Varied and They are Increasing Rapidly

By Budd Mulloy and Jerome Campbell

Power Plants on Wheels

Comfort in Modern Passenger Trains Requires Large Quantities of Electric Power Put to Work in Many and Diverse Ways. On Most Trains, this Needed Energy Is Produced by Cor-Mounted Generators Driven by the Axles. Other Methods Are Also Used

By A. G. Oehler and C. B. Peck

Industry's Permanent Pull

Modern Permanent Magnetic Alloys, Two to Ten Times More Powerful Than Former Materials, are Responsible for Compact, Efficient War-Time Energy-Converting Devices and Will be the Key Elements in Many Post-War Electrical and Electronic Products

By Fred P. Peters

Infra-Red in Industry

By Harnessing Forces that Act Outside the Bounds of Human Senses, and Applying Electronic Amplification, Chemical Control Methods Have Been Highly Refined. The Infra-Red Technique is Not Yet in Wide Use, but Successful Results So Far Point to Broad Future Fields

By D. H. Killeffer

Cathodic Protection

Pipelines and Other Underground Metallic Structures are Constantly Subject to Corrosion Caused by Galvanic Currents. Control of Such Corrosion Can be Obtained by the Use of Buried Anodes Which Set Up Counter Potentials. Masses of Magnesium Offer a Ready Solution

By L H Woodman

Departments

  • 50 Years Ago, July 1945

  • Recommended

    Our Book Corner, July 1945

  • Departments

    Previews of the Industrial Horizon, July 1945

  • New Products and Processes, July 1945

  • Current Bulletin Briefs, July 1945

  • Telescoptics, July 1945

Purchase To Read More

Already purchased this issue? Sign In to Access
Select Format
July 1945

Feeling Dead Inside?

Tear Into Our eBook