Scientists Create Artificial Wood That Is Water- and Fire-Resistant

The synthetic material is faster to make than natural wood

From “Bioinspired Polymeric Woods,” by Zhi-Long Yu et al., in *Science Advances*, Vol. 4, No. 8; August 10, 2018

Join Our Community of Science Lovers!

A new lightweight substance is as strong as wood yet lacks its standard vulnerabilities to fire and water.

To create the synthetic wood, scientists took a solution of polymer resin and added a pinch of chitosan, a sugar polymer derived from the shells of shrimp and crabs. They freeze-dried the solution, yielding a structure filled with tiny pores and channels supported by the chitosan. Then they heated the resin to temperatures as high as 200 degrees Celsius to cure it, forging strong chemical bonds.

The resulting material, described in August in Science Advances, is as crush-resistant as wood, says author Shu-Hong Yu, a materials chemist at the University of Science and Technology of China in Hefei. Faster freeze-drying creates even smaller channels and pores, which further strengthens the material, Yu says. And higher curing temperatures increase bonding within the resin and increase the material's strength, the team found. Adding human-made or natural fibers to the mix could also help.

On supporting science journalism

If you're enjoying this article, consider supporting our award-winning journalism by subscribing. By purchasing a subscription you are helping to ensure the future of impactful stories about the discoveries and ideas shaping our world today.

Unlike natural wood, the new material does not require years to grow. Moreover, it readily repels water—samples soaked in water and in a strong acid bath for 30 days scarcely weakened, whereas samples of balsa wood tested under similar conditions lost two thirds of their strength and 40 percent of their crush resistance. The new material was also difficult to ignite and stopped burning when it was removed from the flame.

The mock wood could be used to make ding-resistant packaging, says Lennart Bergström, a materials scientist at Stockholm University in Sweden, who was not involved in the work. Its porosity lends an air-trapping capacity that could make it suitable as an insulation for buildings, he adds. Eco-friendly alternatives to the polymer resins also could boost interest in the material.

Subscribe to Support Independent Journalism

Great science journalism requires human expertise, time, effort and creativity. And it costs money. That’s why I and the journalists here at Scientific American hope you’ll join our community.

When you subscribe, you are supporting staff and freelance journalists who are passionate about telling science stories that are true, important and compelling. Our editors and reporters are often experts in their fields, which means they understand the nuances of big discoveries and can untangle the breakthroughs from the hype. With a subscription, you are also supporting rigorous fact-checking to ensure the words we publish are precise and accurate. And you’re supporting original illustrations, graphics and photos that bring you closer to an advanced laboratory, an ice sheet in Antarctica or a space mission in orbit. You’re helping us craft other types of high-quality journalism as well: Our newsletters are carefully written, edited and curated by staffers you have or will come to know and love. Our Science Quickly podcast is based on original reporting, collaboration with editors and scientists and exacting production.

Subscriptions keep this engine running so we can continue to deliver thoughtful, rigorous and independent science journalism to you. In an era of viral misinformation, this work is crucial. If you value what we do, I hope you’ll consider joining us as a subscriber

Thank you,

Jeanna Bryner, Editor in Chief, Scientific American